How does the Containment Sampling Port work?
The Containment Sampling Port is designed for sampling under containment conditions up to OEB 5. The sample is filled into bottles with a wide opening and can be visually inspected until the desired fill level is reached. The filled bottle is removed via the endless liner. The Containment Sample Port can be easily combined with all common samplers such as slide or screw samplers.
How does it work?
A sample bottle is fed into the sample port through the push-port. Another bottle is inserted and pushed into position using the push-port lid. This allows the first inserted bottle to be taken out at the lower port. The system is always sealed against the outside via the push port. The bottle can then be easily handled in the endless liner. The bottle cap is fixed in the cap holder, the bottle is unscrewed and screwed into the threaded port of the downpipe. The filling of the bottle can be visually checked. The bottle is then unscrewed from the threaded port of the downpipe and screwed onto the cap attached in the cap holder. The bottle is dispensed through the endless liner.
https://www.youtube.com/watch?v=ru_O0NmnW3U
If you would like a demonstration at your factory rather than at a trade fair, please let us know by email (info@plantpartner.nl) or call directly on 085-0600 670. www.plantpartner.nl
